Product Details
Place of Origin: changzhou
Brand Name: shinma
Certification: ISO14001，ISO9001
Model Number: FL-60
Payment & Shipping Terms
Minimum Order Quantity: 1set
Price: USD20000-100000/set
Packaging Details: nacked packing
Delivery Time: 60days
Payment Terms: L/C, D/A, D/P, T/T
Supply Ability: 30sets
Name: |
Fluid Bed Dryer Granulator |
Material: |
Stainless Steel 304 316 |
Final Moisture Content: |
＜0.2% |
Weight (KG): |
1200 |
Applicable Industries: |
Medicine Processing, Chemicals Processing, Food Processing |
Marketing Type: |
Ordinary Product |
Core Components: |
PLC, Pressure Vessel |
Voltage: |
380V |
Power: |
3-45KW |
Evaporation Capacity(kg/h): |
Evaporate Capacity 50-100 |
Material Yield Rate (%): |
≥99 |
Capacity (Kg /batch): |
5-500 |
Name: |
Fluid Bed Dryer Granulator |
Material: |
Stainless Steel 304 316 |
Final Moisture Content: |
＜0.2% |
Weight (KG): |
1200 |
Applicable Industries: |
Medicine Processing, Chemicals Processing, Food Processing |
Marketing Type: |
Ordinary Product |
Core Components: |
PLC, Pressure Vessel |
Voltage: |
380V |
Power: |
3-45KW |
Evaporation Capacity(kg/h): |
Evaporate Capacity 50-100 |
Material Yield Rate (%): |
≥99 |
Capacity (Kg /batch): |
5-500 |
FL Series Fluid Bed Dryer Granulator by WANDA - Environmental Protection and Energy Saving
Description:
After air is purified and heated, then it will be introduced from the bottom of induced-draft fan and passed through the screen plate of raw material. In working chamber, the state of fluidization is formed through stirring and negative effect. The moisture is evaporated and removed rapidly and the raw material is dried quickly.
Principle:
The powder granule the container (fluidization bed) appears the state of fluidization. It is preheated and mixed with clean and heated air. At the same time the solution of adhesive solvent is fogged and sprayed into the container. It makes the some particles become granulating that contains adhesive. Being of unceasing dry through hot air, the moisture in the granulating is evaporated and the adhesive is solidification. The process is carried out continuously. Finally it forms ideal, uniform and porous granules.
1.the drying speed is fast. After the centrifugal spray, the specific surface area of the feed liquid is greatly increased, and 95-98% of the water can be evaporated instantly in the high temperature airflow, and the drying time is only a few seconds.
2.the use of concurrent flow spray drying form can make the droplet and hot air flow in the same direction, although the temperature of hot air is higher, but because the hot air into the drying room immediately contact with the spray droplets, indoor temperature drop will not dry the material excessive heat, so it is particularly suitable for the drying of heat-sensitive materials.
3.wide range of use. According to the characteristics of the material, it can be dried by hot air or molded by cold air. Large difference is very big features can use the production, the commonly used are: polymers and resins, dyes, pigments, glass, herbicides, insecticides, carbohydrates, milk egg products, slaughterhouse byproducts, blood and blood products, detergents and surfactants fertilizer, organic compound, inorganic compound, instant food, drugs, etc.
4.because the drying process is completed in an instant, the particles of the product basically keep the approximate spherical droplets, with good dispersion, fluidity and solubility.
5. Simplified production process, convenient operation and control. Spray drying is usually used for the solution with 40-60% wet product content. Even if the content of special materials is up to 90%, it can be dried into powder products at one time. After most products are dried, there is no need for crushing and screening, which reduces the production process, simplifies the production process and improves the purity of the products. The particle size, bulk density and moisture of the product can be adjusted and controlled by changing the operating conditions within a certain range. It's easy to manage.
6.In order to prevent the material from being polluted and prolong the service life of the equipment, all the parts in contact with the material are made of stainless steel. In order to facilitate the operation, the control system adopts integrated operation.
