LPG-500 Beer Yeast Spray Dryer spray drying equipment
Equipment design condition
1, Liquid conditions
Liquid product name: beer yeast liquid
Initial moisture: ~85% (design as 80%)
Final Moisture: ≤5%
Water evaporation capacity 500kg/h
The liquid temperature: Ambient temperature
2, Processing conditions
Spray method: Centrifugal atomizer
Liquid and the hot air contacting method: Co-current
Heat source and heating: Electric heating
Inlet temperature: 180~200℃(design as 180℃)
Exhaust temperature: 90~100℃(design as 85℃)
Product Capture mode: Cyclone separator + wet scrubber
Product collect mode: Frozen dehumidification product collect
3, the design weather conditions ( Standard )
Atmospheric pressure 101.3KPa
Environment temperature: 10 ℃
Relative Humidity: 80%
4, Public Works
4.1, Power
Power supply: 380V, 3 phase, 50HZ
Power: Drive 96.5kw + electric heating 1125kw
+ air sweeper electric heating 18kw
4.2, Compressed air
Pressure: 0.6 MPa
Consumption: 1.5m3/min
4.3, Water
Pressure: Cleaning water gun
Consumption: 1000kg/h
4.3, equipment covers an area space L × W × H 16m × 12m × 16m
Technical data sheet
| Water Evaporation | 500kg/h (pure water) | Diameter/Height | 5.6M/13.5M |
| Operation temp | In 180℃-200℃ / Out 90-100℃ |
Atomizer LPG-500 |
Rolling speed 15500 rpm Diameter 150mm |
| Electricity Power | Drive 80kw | ||
| Heat supply | About 5.81 x105 kcal/h | Hot water consumption | 1000kg/time (for cleaning) |
| Electric consumption | 770-880 kilowatt-hour | ||
| Drying type | Open circle system | Feeding type | Screw pump |
| Hot air way | Co current | Heat source | Electric |
| Dust system | Cyclone separator + wet scrubber | Atomizer way | Centrifugal atomizer |
